0 views
0 watching

Important information about the sale of this item/s. Sale of this item/s in an auction context is on an “as is, where is” basis. Where available, a full inspection of the item/s prior to bidding is highly recommended.

The description is a guide only. Grays does not test the item/s or test their inclusion/s. As a result, there may be other damage or issues which have not been identified in the description or photographs. Grays does not make any warranties as to the operation of any feature or inclusion referred to in this description.

Overview

Condition Used
GST: Exclusive (see below note)
Buyers premium
Buyers premium
$0
Final Bid Price Buyers Premium
ANY $0

Learn more

Category Construction, Scaffolding & Formwork
Sales Support Jake Samios or (m) 0408 125 700
Lot ID 0001-7045215
Part of Sale 2021 SAE PACKLINER® MB PUGMILL FOAM BITUMEN COLD-MIX PLANT
Warranty

Description

2021 Foam Bitumen & Cold Mix Asphalt Manufacturing Plant – 400t per hour

2021 Marini Cold Mix Asphalt Plant (SAE Fayat) with AMMAN Foam Bitumen System

Wide range of manufacturing capabilities including;

  • Foam Bitumen Basecourses
  • Cold Mix Asphalt
  • Cement/Lime Blended Aggregates
  • Precoated Aggregates
  • Optimum Moisture Roadbases
  • Recycled Product Blending

Up to 400t continous mixing

3 x 11m3 Feedbins

2 x 40,000l Silos with Weight Scales and Dual Powder Dosing and Feeder Screws

Foam Bitumen Injection and Mixing System

Liquid Adjunct Kit Installed

Control Fully Insulated Cabin with Compumat Control System

27,000l Transportable Bitumen Storage Tank

Upgraded for Electrical Compliance to Australia Mines Standards

This state of the art plant has a proven track record of producing high quality Foam Bitumen basecourses fully compliant to highly specified large projects in Queensland.

The plant is capable of producing a wide range of modified, stabilised and blended products at high production rates. It is modular and can be mobilised to service major projects as required.

The plant is a SAE Fayat Marini brand and was newly built and installed in 2021 producing over 100,000t of product to date.

More Images Available Upon Request

Item will be dismantled and ready for transport at a cost of $50,000 + GST

Located at Yatala, QLD 4207

(125803-1)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Debit Card / Credit Card / PayPal surcharge fee may apply. See User Agreement

COVID-19 INFORMATION

  • Grays will require social distancing standards to be followed by employees and members of the public.
  • Grays staff are not permitted to handle customers devices or stationery.
  • Grays staff may ask you to wait outside a premises to ensure people numbers do not exceed social distancing requirements.
  • Please maintain a distance of 2 metres between yourself and other people when on site.
  • Grays will not be supplying customers with Hi-Viz vests.
  • Grays staff may ask you to leave site should you display any flu like symptoms.

WHS

WHS

Grays advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. Grays will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Enclosed footwear must be worn at all times when inspecting or collecting goods.
  • Persons under the age of 16 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below:

Safe Work Method Statement

Non-Prescribed Electrical Equipment

Non-Prescribed Electrical Equipment

The DIY signage attached is in relation to non-prescribed electrical equipment purchased, of which electrical work is required under the Electrical Safety Act 2002 to be performed by a licensed electrical contractor or licensed electrical worker.

Examples-

  • Fixed-wired electrical equipment, such as air conditioners, stoves, ovens, electric hot water systems, ceiling fans, light fittings
  • Electrical accessories, such as socket outlets, light switches, electrical cable, wall switches, plugs and cord extension sockets
  • Electrical parts, such as electrical motors, switches, solenoids, elements

Electrical Power Tools & Equipment

if you have not purchased electrical tools and equipment in this auction disregard this notice.

Electrical Power Tools and Equipment (Inc. electrical leads)

The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be

electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.

You are urged to:

  • Use the power tool only for its intended purpose.
  • If the power tool is for indoor use only, do not use outdoors.
  • Do not immerse the power tool in water unless it is designed for this purpose.
  • Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
  • Do not use electrical power tools in the rain.
  • Make sure you have dry hands when operating an electrical power tool.
  • Do not use a damaged power tool.
  • A power tool may not be intended for use by children or people with an illness or disability without supervision.
  • Young children should not be allowed to play with the power tool.
  • Some power tools require special precautions for installation or user maintenance or both.
  • The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
  • Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
  • Ensure ventilation holes or outlets are not blocked or partially obstructed.
  • If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
  • If the supply cord or plug is damaged, the manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
  • Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
  • Other power tools that have a supply cord that cannot be replaced, should be scrapped.
  • The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
  • A safety switch can enhance electrical safety when using electrical power tools.

FAQs

  • What is Autobid?
  • What is 'Going, Going, Gone'?
  • What is Buyer's Premium?
  • What if I change my mind?
  • How do I cancel my bid?
  • Can I inspect items before bidding on them?

For answers to these questions and more, please visit SUPPORT

Yellowgate - Rent Now, Buy Later

Yellowgate - Rent Now, Buy Later

Grays has partnered with Yellowgate to help you gear up with $30,000 to $500,000 worth of plant and equipment with Yellowgate’s Rent Now, Buy Later solutions*.

  • 12 month rental term
  • Buy Anytime
  • Return after 12 months
  • 100% tax deductible
  • Off balance sheet
  • Low upfront costs

4 easy steps to get started:

1. Verified ID

2. Verified Business

3. Verified Work Source

4. Verified Equipment

Click here for more information

*Important information: Business customers only. Finance provider is Yellowgate Group Pty Ltd ACN 647 366 854 ("Yellowgate"). All applications for credit are subject to credit approval criteria. Terms and conditions, fees and charges apply. Grays eCommerce Group Limited ACN 125 736 914 (“Grays”) does not provide or arrange finance. By clicking this link you will be redirected to Yellowgate’s website where you may complete an application for finance.

This information (a) is current as at 21/04/2021, (b) is subject to change, (c) is provided for general information only, (d) does not take into account your personal situation, and (e) does not constitute financial and/or tax advice. You should consider whether the information is appropriate to your needs, and where appropriate, seek professional advice from financial, legal and taxation advisers. The information has been prepared by Yellowgate and Grays does not warrant its accuracy. Although every effort has been made to verify the accuracy of the information, Yellowgate and Grays, and each of their officers, employees and agents disclaim all liability (except for any liability which by law cannot be excluded), for any error, inaccuracy, or omission from the information or any loss or damage suffered by any person directly or indirectly through relying on this information.

As a referrer, Grays eCommerce Group Limited ACN 125 736 914 will receive a financial benefit (referral fee) from Yellogate for each customer that completes a purchase of equipment using Yellowgate’s Rent Now, Buy Later funding solution.

© 2021 Grays eCommerce Group Limited ACN 125 736 914 is a wholly owned subsidiary of Grays.com Pty Ltd ACN 634 636 310.

Available Upon Request

Expressions of Interest Conditions

All assets in this sale are sold on an “As Is - Where Is” basis.

Assets included in this sale may be used, therefore inspection is highly recommended. Photos and descriptions should be used as a guide only.

Delivery is not an option for this sale. The removal of goods purchased is the buyers responsibility.

Motor Dealer Licence 1700072

Terms & Conditions of Sale

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD “AS IS” WITHOUT WARRANTY AND COOLING OFF PERIOD

By registering and bidding you have agreed to our terms and conditions of sale. All bidding is subject to the online "Users Agreement".

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the users agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & Conditions can be found by clicking here Terms & Conditions

Buyers Please Note:

  • Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled unless there are exceptional circumstances (as determined by Grays). If you are unsure do not bid as no refunds will be given unless there are exceptional circumstances (as determined by Grays).
  • By registering and bidding, you have agreed to Grays terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on any items in this auction.
  • The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.
  • Grays guarantees that all vehicles/boats/motorbikes (Vehicle(s)) in this sale are sold with clear title, however in this respect note that: Bidders may find when they do perform a PPSR check (highly recommended) in many cases the vehicles do have a security interest registered against them, which will be lifted as soon as the relevant vehicle is sold and monies are cleared in the secured party’s/security holder’s account; and Please allow up to 10 business days for the security interest to be removed.
  • Grays staff are onsite for security purpose only, please make sure you have people to help you load your purchases and provide suitable transport.
  • Collection can only take place once cleared funds have been received.

Inspection & Collection

Please click the below link for updated information relating to Covid-19 restrictions at local Grays sites:

Open For Business

Location: Yatala, QLD 4207

Inspection: By Appointment

Collection: By Appointment

Collection Notes:

  • Any items remaining uncollected after the specified timeframe may be deemed abandoned and disposed of unless prior arrangements have been made with the respective contact listed on the sale.
  • Goods will only be released with the correct buyer details being provided (full buyer name, sale number, Lot number and I.D.).
  • Grays may take a copy (photocopy or electronic copy) of the document that proves the Registered Buyer’s identity, such as a driver licence or other photo ID. Taking such a copy is reasonably necessary for Grays’s business activities. The copy will be collected, held, used and disclosed by Grays in accordance with the
Grays Privacy Policy
  • Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale.
  • Please be aware during busy periods an extensive wait time should be expected.
COLLECTION CAN ONLY TAKE PLACE ONCE CLEARED FUNDS HAVE BEEN RECEIVED

General Site Information

General Site Information

Please Note: Enclosed footwear must be worn at all times when inspecting or collecting goods.

  • Collection of the assets is the responsibility of the purchaser.
  • Grays - WILL NOT package your item or organise a courier / transport for the purchaser.

Site Access:

  • Persons under the age of 16 years will not be permitted on site unless accompanied and supervised on site.It is a condition of entry that all persons entering the site comply with any directions given by Grays staff, their representatives or the site controller.
  • It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.
Personal Protective Equipment (PPE):
  • Grays will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.

Removal of Plant Information

  • Grays will specify the site requirements for the safe removal of plant from the site. All work carried out on site will be performed in a manner compliant with the relevant State Occupational Health and Safety Legislation. All work undertaken on the site must be performed by suitably qualified and insured persons.
  • Licensing of Tradespersons - All tradespersons must possess the relevant licences to undertake plant disconnection and removal of plant activities. Copies of these licenses will be requested prior to the commencement of work and copies/license details will be retained by Grays
  • Insurances - Copies of Insurances - PI/PL and Workers Compensation will be required to perform work on the site and copies will be retained by Grays.
  • Agreement - before any work commences the contractor/tradesperson must sign and agree to adhere to Grayss OHS work practices.
  • Safe Work Method Statement (SWMS) - the contractor/tradesperson will be required to submit a completed SWMS
  • Work at Heights - All work above 2.0 metres will require the use of certified equipment. This equipment may include safety harnesses and work platforms. All equipment used will be in within the safe test date requirement for such equipment. All work at heights risks will controlled
  • Electrical Equipment- All equipment brought onto site must be considered safe and fit for use and be tested and tagged as required by AS/NZS 3760:2003: In-service safety inspection and testing of electrical equipment.
  • Electrical Disconnection of Plant - All disconnection of hard wired plant must be performed by a licensed tradesperson
  • Disconnection of Water - All disconnection of water services must be performed by a licensed tradesperson
  • Disconnection of Gas - All disconnection of gas services must be performed by a licensed tradesperson
  • Disconnection of Refrigerant Lines and Removal of Refrigerant Gases - All disconnection of refrigerant lines and removal of gases must be performed by persons possessing a current Refrigerant Handling Licence and have the required authorisations to store/sell refrigerant gases
  • Compressed Air - Compressed air must only be used for the purpose for which it is installed. Under no circumstances should compressed air be used for cleaning yourself down or other people; and never direct high pressure compressed air at other people. In addition to the risk of disturbed material getting into the eyes there is the possibility that air may be injected into the blood stream which can ultimately lead to death. The appropriate personal protective equipment (PPE) must be worn when working with compressed air.
  • Residual Waste – For assets that are deemed too risky to remove/relocate without the disposal of internal residual waste (including hydraulic/black water/by product/hazardous waste), a licensed waste disposal contractor is required to decontaminate the assets prior to removal or transport.

Surplus Equipment to Sell?

Surplus Equipment to Sell?

For an obligation free appraisal and quote or to learn more about selling at Grays, please visit SELL AT GRAYS

Why Grays?

Why Grays?
  • 2M+ Registered Users
  • 1M+ Unique Visitors Per Month
  • National Marketplace
  • 24 Hour Bidding
Yellowgate

2021 Foam Bitumen & Cold Mix Asphalt Manufacturing Plant – 400t per hour

EXPRESSIONS OF INTEREST

Enquiries: Jake Samios 0408 125 700 or jake.samios@grays.com.au


    Offers Close 4:00pm, Friday 28th of July

Jake Samios Enquires about the item