This Sale is Pick Up Only from Carlton, NSW

These Assets are Used therefore Inspection is Highly Recommended Prior to Bidding, Description & Photos Should Be Used as a Guide Only

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

ALL ASSETS IN THIS SALE ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

BUYERS PLEASE NOTE:

• Collection of assets is the responsibility of the purchaser.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have people to help you load your items and right transport.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Pick ups are not allowed outside of the dates/times specified.

• Epic brake press 60 ton 3100mm W x 3mm 10 gauge
• Farley plasma cutter model ELF HD40
• Sheet metal ribbing roller 1500mm W
• John Heine guillotine model 108B 2500mm W 10 gauge
• AP lever guillotine model 8J 2480mm W 12 gauge
• Oliver TDF folding machine 1500mmW
• Engel TDF profile roll forming machine model M-1640 with 16 sets rollers
• Pacific ACL profile Pittsburgh seaming roll forming machone with 8 sets rollers
• Lockformer ductwork folding straight 10mm turn up machine 20 gauge
• Sheet metal coil line with 6 dispensing reels
• GZ-HCH (China) spiral duct forming machine model LXA-100/1600
• John heine pan brake model 73H semu I 2450mmW
• 2 John Heine pan brakes model &! H semu 2 1220mm !
• John Heine folder model 168 H semu 1 2450mm W
• Omes cold cut saw model 5100A4M 200mm blade
• Various MIG & spot welders & plasma cutters
• Various Ducting Lifters & 2 Site Ductwork storage & lifting cages
• Steel shipping container 20ft
• Box trailer single axle
• Large rance Assorted power & air tools
• Aluminium scaffold tower, various aluminium ladders 240v OXT leads, bench
• grinders, pedestal fans, air compressors, hydraulic pallet trucks, site storage boxes, steel work benches, laser levels & much more

• Hyster ride on counter balance forklift model 5150A 6000kg capacity

• Range good quality office furniture inc, 3 person workstation, office suites, desks, chairs, filing cabinets, clients lounge, boardroom furniture, dishwasher, 2IP hot water unit etc…
• 2 TSI electronic estimating boards (1 new still in box)
• Xerox 3030 plan printer
• Canon 2200 photo copier
• Various laser printers, computer screens & keyboards, office sundries, etc…
• Alcatel omni PLX digital phone system 100 line capacity with approx 14 display handsets

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium ie Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

• Thursday 27th October between 9:00am & 3:00pm

Locations: 175 belluve Parade, Carlton NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Wednesday 2nd November between 9am & 3pm
• Thursday 3rd November between 9am & 3pm
• Friday 4th November between 9am & 3pm

Location: 175 Belluve Parade, Carlton NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting Grays staff to release your purchases to the third party.

Please Note:

• Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
• Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Note: Dismantling/Decommissioning of some assets in this sale will require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.