This is an auction sale. All assets in this sale are sold on an “As Is - Where Is” basis.

Assets included in this sale may be used, therefore inspection is highly recommended prior to bidding. Photos and descriptions should be used as a guide only.

Delivery is not an option for this sale. The removal of goods purchased is the buyers responsibility.

Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled unless there are exceptional circumstances (as determined by Grays). If you are unsure do not bid as no refunds will be given unless there are exceptional circumstances (as determined by Grays).

Motor Dealer Licence 1700072

GST & Buyers Premium:

The GST treatment and Buyers Premium allocation for all lots in this auction are identified in the OVERVIEW section above. Where applicable, GST and Buyers Premium are applied to the final bid price and a detailed breakdown is provided on the CONFIRM BID page.

We accept the following methods of Payment:

Credit Card

• 1.2% surcharge applies to Mastercard & VISA transactions
• 0.7% surcharge applies to Debit card transactions
• 2.5% surcharge applies to American Express transactions
• No other cards are accepted
• Invoices totalling less than $10,000 will be automatically debited from the card nominated within your account
• Invoices totalling in excess of $10,000 can be paid in-person at any Grays office

PayPal

• 1.2% surcharge applies to PayPal transactions
• Only accepted for invoices totalling less than $10,000 where elected as your preferred payment method within your account

EFT (Direct Deposit)

• For invoices totalling in excess of $10,000. Payment must be made in full within two business days of the auction closing.
• Please ensure to state your invoice number as the payment reference and email proof of the remittance to accountsreceivable@grays.com.au
• As EFT transfers can take up to 2 business days to clear, please contact Grays prior to collecting your purchase to confirm receipt of clear funds

Cash, Bank Cheques and Personal Cheques are not accepted payment methods.

Please see below for further information:

Payments

For invoice payment enquiries only, please email: accountsreceivable@grays.com.au

For all other enquiries, please email: industrialcs@grays.com.au

What is Product Condition?

The Condition of each product is stated on its Lot Page, and we strongly urge you to familiarise yourself with the Condition before bidding. This is because Grays sells a wide range of products in a variety of Conditions on behalf of our Vendors.

It's important that you read the Lot Description for possible additional information on the Condition of the product including any applicable warranty details. You should take the Condition and the Lot Description into account when you place your bid as we do not offer refunds if you change your mind about your purchase.

Information regarding Product Conditions can be found by clicking here Shopping With Grays

• Typically, auctions end at their posted closing time. There are some exceptions to this however, if there are any bids placed on a particular lot within 10 minutes of the auction closing time (the "Going, Going, Gone!" period). It will be extended until there are no more bids placed within ten minutes of the last successful bid.
• There is no limit to the number of times an online auction can be extended. This makes Grays work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter an "AUTOBID" that you think will win!

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD “AS IS” WITHOUT WARRANTY AND COOLING OFF PERIOD

By registering and bidding you have agreed to our terms and conditions of sale. All bidding is subject to the online "Users Agreement".

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the users agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & Conditions can be found by clicking here Terms & Conditions

Buyers Please Note:

• Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled unless there are exceptional circumstances (as determined by Grays). If you are unsure do not bid as no refunds will be given unless there are exceptional circumstances (as determined by Grays).
• By registering and bidding, you have agreed to Grays terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on any items in this auction.
• The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.
• Grays guarantees that all vehicles/boats/motorbikes (Vehicle(s)) in this sale are sold with clear title, however in this respect note that: Bidders may find when they do perform a PPSR check (highly recommended) in many cases the vehicles do have a security interest registered against them, which will be lifted as soon as the relevant vehicle is sold and monies are cleared in the secured party’s/security holder’s account; and Please allow up to 10 business days for the security interest to be removed.
• Grays staff are onsite for security purpose only, please make sure you have people to help you load your purchases and provide suitable transport.
• Collection can only take place once cleared funds have been received.

Please click the below link for updated information relating to Covid-19 restrictions at local Grays sites:

Open For Business

Location: 34 Mill Street, Mossman,Qld-4873

Inspection: Wednesday 16th October 9.00am to 3.00pm

Collection: Tuesday 22nd October to Thursday 24th October 9.00am to 3.00 pm

Collection Notes:

• Collections can only take place once cleared funds have been received.
• Items remaining uncollected after the specified timeframe may be deemed abandoned and disposed of unless prior arrangements have been made with the respective contact listed on the sale.
• Goods will only be released with the correct buyer details being provided (full buyer name, sale number, Lot number and photo ID).
• Asset packaging and removal are the purchaser’s responsibility in the time frame specified for the sale.
• During busy periods, extensive wait time may occur.
• Please call Customer Service on 1300 710 629 to confirm lifting and loading capabilities for individual sites.
• Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Please refer to our delivery homepage for Collection and Delivery options.

If you wish to send a third party to collect your goods on your behalf, they will need:

• A copy of your Winner's Email.
• A scanned copy of your photo ID.
• A letter signed by you authorising them to collect the goods on your behalf (Please refer to the Third-Party Collection Authorisation template below).
• They will also be required to produce identification and sign for the goods on behalf of buyers acting as the authorised agent.
• Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Grays do not carry manual consignment notes nor complete them for third party carriers. Grays staff will not release the goods unless they carry the appropriate authority.

Please note: Grays are not responsible for the goods once they have been signed for. Problems relating to transportation are the responsibility of the third party acting on your behalf.

• High Vis Vests are a mandatory requirement for all Grays sites.
• Enclosed footwear is a mandatory requirement for all Grays sites.
• Enclosed footwear is a mandatory requirement for all Grays vendor sites.
• Grays may specify mandatory PPE required to be worn before entry is permitted. This equipment may include safety boots, safety glasses, hearing protection, hard hats, or any other item of PPE deemed necessary.
• All persons entering the site must comply with any directions given by Grays staff, their representatives or the site controller.
• Persons under the age of 16 years are not permitted on sites unless accompanied and supervised by a responsible adult.

• Persons under 16 years are not permitted on Vendor sites Grays have assessed as high risk.
• Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

• Grays staff will not load a truck, trailer or vehicle that is assessed by them as inappropriate, this includes, but is not limited to,

• Oversize
• Overweight
• Over height

• Items that are fixed to a pallet, must remain this way when loading.
• Items with manufactured lifting points, will only be lifted using these features.
• Drivers MUST wait in the designated exclusion zone when loading procedures take place.
• It is the responsibility of the buyer or third party to ensure they bring adequate manpower to manually load items into their vehicles, Grays staff are not permitted to assist with manual handling loading tasks.
• It is the responsibility of the buyer, or third party to adequately tie down their load once loaded, Grays staff are not permitted to participate in the tie down procedure.
• Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Please refer to the WHS tab for more information regarding safety requirements at Grays sites.

Below is a table detailing minimum transport requirements for Excavation Equipment products:

For an obligation free appraisal and quote or to learn more about selling at Grays, please visit SELL AT GRAYS

• 2M+ Registered Users
• 1M+ Unique Visitors Per Month
• National Marketplace
• 24 Hour Bidding

• High Vis Vests are a mandatory requirement for all Grays sites.
• Enclosed footwear is a mandatory requirement for all Grays sites.
• Enclosed footwear is a mandatory requirement for all Grays vendor sites.
• Grays may specify mandatory PPE required to be worn before entry is permitted. This equipment may include safety boots, safety glasses, hearing protection, hard hats, or any other item of PPE deemed necessary.
• All persons entering the site must comply with any directions given by Grays staff, their representatives or the site controller.
• Persons under the age of 16 years are not permitted on sites unless accompanied and supervised by a responsible adult.

• No smoking or Vaping.
• No pets and animals.
• Follow traffic management plan and obey the speed limit of 10km/h.
• Follow instructions of Grays staff and comply with the conditions of entry.
• Grays reserves the right to refuse entry.

• Grays staff will not load a truck, trailer or vehicle that is assessed by them as inappropriate, this includes, but is not limited to,

• Oversize
• Overweight
• Over height

• Items that are fixed to a pallet, must remain this way when loading
• Items with manufactured lifting points, will only be lifted using these features
• Drivers MUST wait in the designated exclusion zone when loading procedures take place.
• It is the responsibility of the buyer or third party to ensure they bring adequate manpower to manually load items into their vehicles, Grays staff are not permitted to assist with manual handling loading tasks
• It is the responsibility of the buyer, or third party to adequately tie down their load. Once loaded, Grays staff are not permitted to participate in the tie down procedure

Crane Operations Require:

• Licence verification.
• SWMS for the operation to be conducted.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Truck Crane / Hiab Operations Require:

• Licence verification.
• SWMS for the operation to be conducted on request.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Forklift Operations Require:

• Licence verification.
• Exclusion zone plan verification.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Operators of Plant:

Contractors engaged to move plant and equipment by a buyer or vendor must:

• Follow exclusion zone requirements.
• Be competent to operate the equipment being loaded.
• Ensure all CHAIN OF RESPONSIBILITY (COR) requirements are understood and adhered to.

Disconnection of Electrical Equipment

All work carried out must be completed by a licenced electrician and is required to provide on request:

• High Risk License
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Disconnection of Mains Gas & Equipment

All work carried out must be completed by a licenced Gas fitter / Plumber and is required to provide on request:

• High Risk License.
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Disconnection of Mains Water & Equipment

All work carried out must be completed by a licenced Plumber and is required to provide on request:

• High Risk License.
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Disconnection of Refrigeration and Air Conditioning Equipment

All work carried out must be completed by a licenced Refrigeration Mechanic and is required to provide on request:

• High Risk License.
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.
• Proof any released gasses are captured, stored, transported and disposed of as per legislative requirements.

Disconnection of Electrical Equipment

All work carried out must be completed by a licenced electrician and is required to provide on request:

• High Risk License.
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Dismantling and Decommissioning of Equipment

All work carried out must be completed by Competent Trades and are required to provide on request:

• High Risk License.
• SWMS for the operations assessed to be high risk.
• Confirmation of Workers Compensation Certificate of Currency.
• Confirmation of Public Liability Certificate of Currency.

Working at Heights is when there is a danger a person could fall from one level to another at a height of 1.8 metres or greater. This includes the risk of a fall from:

• in or on an elevated workplace from which a person could fall, or
• in the vicinity of an opening through which a person could fall, or
• in the vicinity of an edge over which a person could fall, or
• on a surface through which a person could fall, or
• in any other place from which a person could fall.

Workers who have been identified using the description above as to be Working at Heights must:

• Provide SWMS.
• Demonstrate harnesses etc are compliant.
• Use purpose-built equipment.

All persons attending a Grays site, or a Grays vendor site must:

• Ensure all work be completed in a manner compliant with all Work Health & Safety legislation.
• Obey all instructions given by Grays staff or Grays representatives, including any direction to stop work for safety reasons.
• Remove all waste generated in the activity they have taken part in.

The DIY signage attached is in relation to non-prescribed electrical equipment purchased, of which electrical work is required under the Electrical Safety Act 2002 to be performed by a licensed electrical contractor or licensed electrical worker.

Examples-

• Fixed-wired electrical equipment, such as air conditioners, stoves, ovens, electric hot water systems, ceiling fans, light fittings
• Electrical accessories, such as socket outlets, light switches, electrical cable, wall switches, plugs and cord extension sockets
• Electrical parts, such as electrical motors, switches, solenoids, elements

if you have not purchased electrical tools and equipment in this auction disregard this notice.

Electrical Power Tools and Equipment (Inc. electrical leads)

The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be

electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.

You are urged to:

• Use the power tool only for its intended purpose.
• If the power tool is for indoor use only, do not use outdoors.
• Do not immerse the power tool in water unless it is designed for this purpose.
• Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
• Do not use electrical power tools in the rain.
• Make sure you have dry hands when operating an electrical power tool.
• Do not use a damaged power tool.
• A power tool may not be intended for use by children or people with an illness or disability without supervision.
• Young children should not be allowed to play with the power tool.
• Some power tools require special precautions for installation or user maintenance or both.
• The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
• Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
• Ensure ventilation holes or outlets are not blocked or partially obstructed.
• If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
• If the supply cord or plug is damaged, the manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
• Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• Other power tools that have a supply cord that cannot be replaced, should be scrapped.
• The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
• A safety switch can enhance electrical safety when using electrical power tools.