Engineering & Manufacturing Assets

• "Servian Lathe 415V 3 phase, approximately 600mm between centres, 3 jaw chuck appoximately dia 160mm, 4 jaw chuck approximately dia 200mm, centre of chuck to bed approximately 140mm, overall size 1700 X 500, assorted tooling included as shown
• "King rich deluxe milling machine (1985), Model No: KR V2000, Serial No: 1349, 2 axis Dro, 415V 3 phase, table size - 1200 X 250, R8 spindle taper, assorted tooling included as shown, also includes removable 150mm space increasing, height from table to spindle to 600mm
• "Herless Milling machine (1995), Model No: KV5, Serial No: KV5-098, 415V 3 phase, 3 axis fagor Dro, 3 axis power feed, NT 40 spindle taper, approximately table size - 1500 X 300mm, assorted tooling included as shown, includes removalbe 150mm spacer to increase max height from table to spindle to approximately 700mm

• Extrusion Line for 6, 8, 10 and 12 inch Layflat Hose Manufacture

• Laser Cutter, Trans Tec Laser Lab, Profile Plus, with transfer system, 3 phase with digital control system, 6.9m bed length, bed takes standard sheets, beds interchangable, spare parts, automatic bed, with PRC 3500 Laser Generator and water cooler, 415 volt (A buyers premium of 7.5% applies to this lot)

• 1998 Tennant LPG yard sweeper, Model: 355, Hours on meter 5548, hydraulic lift waste bin, solid wheels, ROPS, 4 cyl Ford engine, seat torn. In running condition. Inspection recommended.
• Cigweld transmig 210 SE, mobile migwelder, Sno:A902-02A706109, 24O volt, wire feed system, Omega single stage gas regulator Untested, inspection recommended
• Single bag dust extractor, 1.5kw, 240 volt, mobile

• Injection Moulder, Meiki 550 ton, 3 phase
• Label Conveyor, Tronics

• Rupes turbine dust extractor, Model: S1401E, 3 phase digital controls.

This sale is pick up only from various Victorian locations.

These Assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit.

A Buyers Premium of 15% + 10% GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

This Sale is GST Exclusive.

This Sale has a 15% Buyers Premium ie Successful Bid Price is $100 + 15% Buyers Premium = $115.00 + 10% GST = Total Of $126.50.

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. For invoices totaling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 20% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so. Contact (02) 9741 9600 or at email accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail Price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Occupational Health & Safety Asset Removal and Reuse

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose.

The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

• Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
• Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
• Forklift, crane drivers, riggers etc will be required to produce license before commencing work on site
• It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
• Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
• GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes GraysOnline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often.

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

Monday 2nd December 2013 between 9.00am and 4.00pm or by appointment. See lot description for further details

Location ~ Various locations in Victoria, please refer to lot descriptions for further information.

Delivery is not an option for this sale. The removal of the goods is the buyer's responsibility.

Assets are to be collected from various locations in Victoria, please refer to lot descriptions for further information.

• The area is defined as a work site and in accordance with the requirements of the VIC OH&S Act 2004, site removal activities must be conducted on a safe manner. In order to manage and minimise site risks. The assets have been categorized into type A or B Assets

Type "A" assets are low risk & are to be removed by the purchaser with Grays staff supervision and are to be collected on Monday 9th December 2013 between 9.00am and 4.00pm.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid.

Please advise Graysonline of your removal/collection arrangements, the following contractor package must be faxed or emailed to Sue susanp@grays.com.au or 03 8552 4400.

An invoice will be available for collection when you pick up your goods.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots and provide suitably qualified personnel to remove their lots. All lots have been electrically disconnected. Occupational Health and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

If you intend to send a Third Party to collect your goods on your behalf, you need to send them with a copy of your Winner’s E-mail and Signed Note of Authority permitting GraysOnline staff to release your purchases to the third party. Alternatively, Email - susanp@grays.com.au or fax all relevant documents to (03) 8552 4400 with the required information to ensure a speedy and efficient collection.

The information needed is:

• Sale and Lot Numbers e.g. 002-60325
• Buyer’s Registered Name and/or Email
• Transport details: Company Name, Contact Person and Job Number provided by the transport company.

For an obligation free appraisal and quote please contact Michael Bray today on 0407 867 082, 03 8552 4444 or email michaelb@grays.com.au