BIG BRAND AUTO TOOLS AND WORKSHOP

• Bench Pedestal Drill, 240V, 13mm Drill, Capacity, 160 x 160mm, Table Height Table Height 550mm.
• TORIN 20 Gallon Parts Washer On A Metal Stand
• TORIN Motorcycle Mechanical Lifting Jack
• TORIN Engine Leveller, 2000kg Capacity
• TORIN 450kg Engine Stand.
• TORIN Chrome Frame Mechanics Seat, Heavy Duty With Under Tray & Removable Cup Holder
• Pair Metal Folding Wheel Chocks

• ROCKWORTH 6ins Dual Action Air Sander.
• KAWASAKI 150mm Double End Bench Grinder
• KAWASAKI 100mm Portable Electric Angle Grinder, 2-Position Side Handle, 750W
• KAWASAKI 4V Cordless Screwdriver, Lithium Battery & Charger
• KAWASAKI 18V Cordless Drill, Lithium Battery & Charger, 2 Speed, Forward Reverse
• 170pc HSS Twist Drill Set, Titanium Coated
• 114pc Drill Set In Moulded PVC Carry Case

• JETECH 46pc 3/8in Drive Metric Socket & Hex Set
• JETECH 24pc Metric Combination Wrench Set
• JETECH 19pc Electronic Tool Kit
• JETECH 10pc Double Ended Open Wrench Set
• JETECH 8pc Insulated Screwdriver Set
• JETECH 12pc Bearing Separator Set
• JETECH 10pc Soft Grip Screwdriver Set
• JETECH 12pc Disc Brake Caliper Tool Set
• JETECH 29pc Combination Wrench & Hex Key Set
• JETECH 5pc Hook & Pick Set.
• JETECH 3pc Adjustable Wrench Set
• JETECH Fuel & Transmission Line Disconnect Tool Set
• JETECH 9pc Double Ended Ring Wrench Set
• BERENT 6pc Diamond File Set
• BERENT 12pc Chisel & Pin Punch Set
• GRIP 2pc Tapered Reamer Set 1/8 To 1/2ins & 5/32 To 7/8ins
• GRIP 10pcs Battery Terminal Set.
• GRIP 12pc 1/2in Drive Deep Impact Socket Set
• Compression Test Kit
• GRIP Tyre Inflator With Gauge
• GRIP 6pc Flare Nut Wrench Set
• 7pc Panel Beating Set In Blow Mould Case
• KTG Positive & Negative Wind Back Kit
• 19pc Diesel Cylinder Pressure Test Kit
• One Man Break Bleeder Kit
• Air Die Grinder & Cut Off Tool Set.
• 6pc Reducer & Adaptor Set
• POWERBUILT 12pc Damaged Screw Remover Set
• Large Quantity Of Hand Tools, Comprising; Digital Torque Wrench, Dial-Indicator With Magnetic Base, Grease Gun 400cc, Expandable Pop Riveter Gun, Coiled Spring Compressor, Torque Wrench, Piston Ring Plier, Flexible Line Clamps, Heavy Duty Bolt Cutter, Universal Valve Spring Compressor, Air Blow Gun, Spray Gun & Pot, Adjustable Wrench, Water Pump Pliers, Engineers Chisels, Battery Terminal Cleaner & Spreader Pliers, Spark Plug Wrenches, Circuit Testers, Chain Type Locking Pliers, Stubby Claw Hammers, Multi-Function Wire Strippers, Precision Steel Tape Measures, Flexible Magnetic Pick- Up Tool, Tyre Seal Hammer, Glass Suction Plate, Oxy Cutting Torch, Flaring Tool, Digital Multi-Meters, Micrometers, Tin Snips, Digital Tyre Pressure Gauge, Harmonic Balance Puller, Oil Filter Wrench, PVC Pipe Cutter, Electrician Pocket Knives Etc….

• TRADES PRO Cotter Pin Assortment 144pcs.
• TRADES PRO Hitch Pin Assortment 150pcs
• POWERBULIT Zirconia Flap Discs
• JETECH Tool Box With 3 Drawers
• BERENT Tool Tote Bag
• BERENT Metal Workshop Trolley
• JETECH Solid PVC Tool Box
• GRIP Wheel Dollies
• WYNN'S 30mm Padlocks c/w 4 Keys
• Sheets Of Abrasive Paper
• 100pc Mini Auto Fuse Assortment, Comprising; 30amp, 25amp, 20amp, 15amp, 10amp, 7.5amp & 5amp
• Wire Terminal Assortments
• 400AMP Booster Cables
• Cable Ties
• Small Aluminium Step Ladder
• Security Chain & Lock Set
• 382pc Metric O Ring Set.
• GRIP 105pc Engraver & Grinding Accessory Kit

• Tie Down Assemblies, Ratchet Type, L/C 450kg, 25mm x 4Mtrs c/w PVC Coated "S" Hook Each End & Protective Sleeving.
• Tie Down Assembly, Ratchet Type, L/C 2500kg, 50mm x 9Mtrs c/w Hook & Keepers & Protective Sleeves.
• Bow & Dee Shackles

• Minibar Rotating Strobe Warning Light, With 2 x Halogen Beacons, 12/24V, Single Bolt Mounting System, Fuses & Switch, Size 420 x 133 x 205mm.
• CREE LED 60W Light Bar 260mm Length c/w Mounting Brackets
• Twin Head 24LED Twist Lights.
• Slimline LED Strobe Light 12V & 24V, Magnetic Base, 300mm (L) x 150mm (W) x 80mm (H), 10 Functions
• Revolving Warning Beacon With Magnetic Base, 12/24V, Size: 135mm (Length) x 110mm (Height), Amber, c/w Cigarette Lighter Plug & Spiral Cord
• Revolving Warning Beacon With Magnetic Base 12/24V, Size: 155mm x 200mm Length, c/w Cigarette Lighter Plug & Spiral Cord
• LED Flood Work Light 24W, 12v/24v c/w Pedestal & Flush Mount Brackets
• Minibar LED Strobe Warning Light, 12/24V c/w Single Bolt Mounting System, Fuses & Switch, Size 130(H) x 420(L) x 205mm (W)
• Rechargeable Torch/Spot Light, Super Bright H3 Halogen Bulb c/w 6V4AH Lead Acid Battery, AC/DC Adaptor & Lighter Plug, Swivel Handle an d Mount, Shoulder Strap.
• Flood Light Bar 9V to 32V, 12-LED 36W c/w Mounting Brackets & Fittings, Length 175mm
• LED Mechanics Inspection Pocket Torches
• Multi-Purpose Solar Rechargeable 72LED Lantern
• Solar Torches
• Rechargeable Torch/Spot Light
• Laser/LED Light Pens With Touch Screen Stylus
• LED Sensor Light ABS Material
• LED Work Light 18W, 12v/24v Flood Beam c/w Mounting Brackets

• Hi-Vis Mechanic's Gloves
• Pig Skin & Cowhide Riggers Gloves
• CONTEGO Fingerless Mechanics Gloves
• Leather Welders Gloves
• Golden Eagle Deer Skin Riggers Gloves
• NINJA Dyneema Gloves

• Packs Of 20pc Disposable Dust Masks, P20
• TRAFALGAR National Workplace First Aid Kit
• LIVINGSTONE Auto First Aid Kit In PVC Case
• Disposable Particulate Respirator Masks
• 2pc Respirator & Goggle Set.
• Day/Night Safety Vests

• Key Rings
• Nozzle Joint Hose Sets
• Set Of 4 Car Mats
• MSA Safety Specs
• FRONTIER Safety Specs
• JETECH Spray Nozzle Sets
• Metal Key Safe

This is an Auction Sale. Assets included in this sale may be used, therefore inspection is highly recommended prior to bidding. Photos and descriptions should be used as a guide only.

Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled unless there are exceptional circumstances (as determined by Grays). If you are unsure do not bid as no refunds will be given unless there are exceptional circumstances (as determined by Grays).

The GST treatment and Buyers Premium allocation for all lots in this auction are identified in the OVERVIEW section above. Where applicable, GST and Buyers Premium are applied to the final bid price and a detailed breakdown is provided on the CONFIRM BID page.

We accept the following methods of Payment:

Credit Card

• 1.2% surcharge applies to Mastercard & VISA transactions
• 0.7% surcharge applies to Debit card transactions
• 2.5% surcharge applies to American Express transactions
• No other cards are accepted
• Invoices totalling less than $10,000 will be automatically debited from the card nominated within your account
• Invoices totalling in excess of $10,000 can be paid in-person at any Grays office

PayPal

• 1.2% surcharge applies to PayPal transactions
• Only accepted for invoices totalling less than $10,000 where elected as your preferred payment method within your account

EFT (Direct Deposit)

• For invoices totalling in excess of $10,000. Payment must be made in full within two business days of the auction closing.
• Please ensure to state your invoice number as the payment reference and email proof of the remittance to accountsreceivable@grays.com.au
• As EFT transfers can take up to 2 business days to clear, please contact Grays prior to collecting your purchase to confirm receipt of clear funds

Cash, Bank Cheques and Personal Cheques are not accepted payment methods.

Please see below for further information:

Payments

For invoice payment enquiries only, please email: accountsreceivable@grays.com.au

For all other enquiries, please email: industrialcs@grays.com.au

The Condition of each product is stated on its Lot Page, and we strongly urge you to familiarise yourself with the Condition before bidding. This is because Grays sells a wide range of products in a variety of Conditions on behalf of our Vendors.

It's important that you read the Lot Description for possible additional information on the Condition of the product including any applicable warranty details. You should take the Condition and the Lot Description into account when you place your bid as we do not offer refunds if you change your mind about your purchase.

Information regarding Product Conditions can be found by clicking here Shopping With Grays

• Typically, auctions end at their posted closing time. There are some exceptions to this however, if there are any bids placed on a particular lot within 10 minutes of the auction closing time (the "Going, Going, Gone!" period). It will be extended until there are no more bids placed within ten minutes of the last successful bid.
• There is no limit to the number of times an online auction can be extended. This makes Grays work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter an "AUTOBID" that you think will win!

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD “AS IS” WITHOUT WARRANTY AND COOLING OFF PERIOD

By registering and bidding you have agreed to our terms and conditions of sale. All bidding is subject to the online "Users Agreement".

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the users agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & Conditions can be found by clicking here Terms & Conditions

Buyers Please Note:

• By registering and bidding, you have agreed to Grays terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on any items in this auction.
• The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.
• Grays guarantees that all vehicles/boats/motorbikes (Vehicle(s)) in this sale are sold with clear title, however in this respect note that: Bidders may find when they do perform a PPSR check (highly recommended) in many cases the vehicles do have a security interest registered against them, which will be lifted as soon as the relevant vehicle is sold and monies are cleared in the secured party’s/security holder’s account; and Please allow up to 10 business days for the security interest to be removed.
• Grays staff are onsite for security purpose only, please make sure you have people to help you load your purchases and provide suitable transport.
• Collection can only take place once cleared funds have been received.

• Inspection of the assets is highly recommended.
• Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

• Tuesday 9th July 2024 Between 9am & 2pm

Location:

• Unit 2 / 45 Riverside Road, Chipping Norton NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Friday 12th July 2024 & Monday 15th July 2024 Between 8am & 4pm

Location:

• Unit 2 / 45 Riverside Road, Chipping Norton NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner's e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner's e-mail along with a photocopy of your photo ID and signed note of authority permitting Grays staff to release your purchases to the third party.

Please Note:

• Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
• Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Click here for Quote

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. Grays will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.
• Enclosed footwear must be worn onsite – Safety boots may be required at industrial sites.

Note: Dismantling/Decommissioning of some assets in this sale will require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

For customers organising their own freight carrier to collect pickup items:

• The carrier MUST bring a copy of your paid invoice.
• Carriers will be turned away if they do not have a paid copy of your invoice.
• No refunds will be given due to futile collections for carriers that do not produce a paid invoice.

Masman can arrange delivery at very competitive rates:

• Email: freight@masmangroup.com.au
• Allow up to 48hours for a return quotation.
• Send a copy of your paid invoice.
• Note that the asset will need to be sent to the nominated address on your invoice. Address details cannot be changed after the fact.