ABB Robot, Chiller, Vacuum Pump & More - SA

ABB IRB 6600 M2000 Robot

• Serial no: 66-28649
• With ABB S4C Plus M2000 power unit ABB Pendant controller
• Hour meter reads: 26923
• On/Off switch - emergency stop
• Some cabling included
• Power source: 3 phase
• Note: Machine requires unbolting - already electrically disconnected - Buyer to remove, Vendor can assist for loading purposes only.

Location: (876498-1)

Fimotec - Fischer Vibration Feeding Device

• Frame mounted
• Dual front mount speed controllers
• Top fill
• Dimensions: 1950 x 650 x 850 (H) mm

Location: Elizabeth SA (876498-2)

Integra Refrigerated Chiller

• On/off switch
• Control and pump switch
• Tembp gauges
• Emergency stop
• On wheels
• Dimensions: 1500 x 860 x 1320mm
• Power source: 3 phase

Location: Elizabeth SA (876498-3)

Busch MI1502 BV Vacuum Pump

• Serial no: 060112004
• Frame mounted
• On castors
• 3 Phase plug
• 250 HPA
• Dimensions: 1600 x 730mm

Location: Elizabeth SA (876498-4)

Plastic Systems DR 102 MT Dryer

• Serial no: DR059-03
• On/off switch
• 3 Phase
• Frame mounted
• On castors

Location: Elizabeth SA (876498-5)

Plastic Systems H400 Hopper

• Frame mounted
• Inlet/outlet piping
• Dimensions: 860 x 860 x 3500 (H) mm APPROX

Location: Elizabeth SA (876498-6)

Integra Die Temp 5000 Die Heater

• Start/stop buttons
• Temp controllers
• On castors
• Rear inlet and outlets
• Top mount light
• Dimensions: 650 x 690 x 800 (H)mm

Location: Elizabeth SA (876498-7)

This is an auction sale. All assets in this sale are sold on an “As Is - Where Is” basis.

Assets included in this sale may be used, therefore inspection is highly recommended prior to bidding. Photos and descriptions should be used as a guide only.

Delivery is not an option for this sale. The removal of goods purchased is the buyers responsibility.

Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled. If you are unsure do not bid as no refunds will be given.

Motor Dealer Licence LMCT11156

GST Exclusive & Inclusive Examples

A Buyers premium applies to all lots purchased in this auction. Please refer to the individual sale or lot descriptions for the applicable percentage.

GST Exclusive example:

• Successful Bid Price is $109 + 20% Buyers Premium = $130.80 +10% GST = invoice total of $143.88
• Successful Bid Price is $1509 + 16.5% Buyers Premium = $1757.99 + 10% GST = invoice total of $1933.79
• Successful Bid Price is $7009 + 8.5% Buyers Premium = $7604.76 +10% GST= invoice total of $8365.24

GST Inclusive example:

• Successful Bid Price (Inc GST) is $109 + 20% Buyers Premium = $130.80
• Successful Bid Price (Inc GST) is $1509 + 16.5% Buyers Premium = $1757.99
• Successful Bid Price (Inc GST) is $7009 + 7.5% Buyers Premium = $7534.68

Variable Buyers Premium: A Variable Buyers Premium may apply to this sale, a Variable Buyers Premium will automatically adjust as the bid price reaches the above examples.

The Buyer’s Premium will be added to your final bid price.

To claim a GST refund for an asset that has been exported, you must:

• Notify us of your intent to export within five (5) days of the Sale closing date
• Pay your invoice in full (including any GST)
• If the asset is ex-military, obtain a Dept of Defence Export Authorisation Permit and complete a Customs Export Declaration form prior to export. See

• Supply proof of export of the asset within 60 days of the invoice payment date. Acceptable documents are a Bill of Lading, Sea Waybill or Air Waybill
• Please note that refund of GST on Buyers Premium (a service) is only available to overseas buyers

Credit Card

• 1% surcharge applies to Mastercard & VISA transactions
• 1.5% surcharge applies to American Express transactions
• No other cards are accepted
• Invoices totalling less than $10,000 will be automatically debited from the card nominated within your account
• Invoices totalling in excess of $10,000 can be paid in-person at any Grays office

• Only accepted for invoices totalling less than $10,000 where elected as your preferred payment method within your account

• For invoices totalling in excess of $10,000. Payment must be made in full within two business days of the auction closing.
• Please ensure you state your invoice number within the payment reference. As EFT transfers can take up to 2 business days to clear, please contact Grays prior to collecting your purchase to confirm receipt of clear funds

For payment enquiries, please call 1300 362 536 or email:

• For Invoices Under $10,000

• For Invoices Over $10,000

The Condition of each product is stated on its Lot Page, and we strongly urge you to familiarise yourself with the Condition before bidding. This is because Grays sells a wide range of products in a variety of Conditions on behalf of our Vendors.

It's important that you read the Lot Description for possible additional information on the Condition of the product including any applicable warranty details. You should take the Condition and the Lot Description into account when you place your bid as we do not offer refunds if you change your mind about your purchase.

Information regarding Product Conditions can be found by clicking here SHOPPING WITH GRAYS

• Typically, auctions end at their posted closing time. There are some exceptions to this however, if there are any bids placed on a particular lot within 10 minutes of the auction closing time (the "Going, Going, Gone!" period). It will be extended until there are no more bids placed within ten minutes of the last successful bid.
• There is no limit to the number of times an online auction can be extended. This makes Grays work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter an "AUTOBID" that you think will win!

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD “AS IS” WITHOUT WARRANTY AND COOLING OFF PERIOD

By registering and bidding you have agreed to our terms and conditions of sale. All bidding is subject to the online "Users Agreement".

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the users agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & Conditions can be found by clicking here Terms & Conditions

Buyers Please Note:

• Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled. If you are unsure do not bid as no refunds will be given.
• By registering and bidding, you have agreed to Grays terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on any items in this auction.
• The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.
• Grays guarantee that all plant and equipment including earthmoving assets/transport assets/vehicles/boats/motorbikes in this sale are sold with clear title. Bidders may find when they do perform a PPSR check (highly recommended) in many cases the assets do have an encumbrance. Once the asset is sold at auction and monies are cleared in our account, please allow up to 14 days for clear title.
• Grays staff are onsite for security purpose only, please make sure you have people to help you load your purchases and provide suitable transport.
• Collection can only take place once cleared funds have been received.

Location: Elizabeth SA, 5112

Inspection: Monday 15th of August 9.30am - 12.30pm Strictly

Collection: Monday 22nd of August 9.30am - 3.00pm Strictly

Collections Contact Persons - including third party collections (see below):

• Assets located at other sites – Pat Maiolo: pasquale.maiolo@grays.com.au

Collection Notes:

• Any items remaining uncollected after the specified timeframe may be deemed abandoned and disposed of unless prior arrangements have been made with the respective contact listed on the sale.
• Goods will only be released with the correct buyer details being provided (full buyer name, sale number, Lot number and I.D.).
• Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale.
• Please be aware during busy periods an extensive wait time should be expected.

COLLECTION CAN ONLY TAKE PLACE ONCE CLEARED FUNDS HAVE BEEN RECEIVED

If you wish to send a third party to collect your goods on your behalf, they will need:

• A copy of your Winner's Email
• A scanned copy of your photo ID
• A letter signed by you authorising them to collect the goods on your behalf (Please refer below Letter of Authorisation template)
• They will also be required to produce identification and sign for the goods on behalf of buyers acting as the authorised agent.

Grays do not carry manual consignment notes nor complete them for third party carriers. Grays staff will not release the goods to anyone other than you unless they carry the appropriate authority. By appointing third party pick up you have given them the authority to sign off on the condition of the goods being picked up.

Please note: Grays are not responsible for the goods once they have been signed for. Any problems relating to the transportation of the goods will need to be taken up with the third party acting on your behalf.

Please Note: Enclosed footwear must be worn at all times when inspecting or collecting goods.

• Collection of the assets is the responsibility of the purchaser.
• Grays - WILL NOT package your item or organise a courier / transport for the purchaser.

Site Access:

• Persons under the age of 16 years will not be permitted on site unless accompanied and supervised on site.It is a condition of entry that all persons entering the site comply with any directions given by Grays staff, their representatives or the site controller.
• It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.

• Grays will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.

For an obligation free appraisal and quote or to learn more about selling at Grays, please visit SELL AT GRAYS Consign Now / Why Grays?

• 2M+ Registered Users
• 1M+ Unique Visitors Per Month
• National Marketplace
• 24 Hour Bidding

Grays advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. . Grays will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Enclosed footwear must be worn at all times when inspecting or collecting goods.
• Persons under the age of 16 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

• Grays will require social distancing standards to be followed by employees and members of the public.
• Grays staff are not permitted to handle customers devices or stationery.
• Grays staff may ask you to wait outside a premises to ensure people numbers do not exceed social distancing requirements.
• Please maintain a distance of 2 metres between yourself and other people when on site.
• Grays will not be supplying customers with Hi-Viz vests.
• Grays staff may ask you to leave site should you display any flu like symptoms.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below:

The DIY signage attached is in relation to non-prescribed electrical equipment purchased, of which electrical work is required under the WA Electrical (Licensing) Regulations 1991 to be performed by a licensed electrical contractor or licensed electrical worker.

Examples:

• Fixed-wired electrical equipment, such as air conditioners, stoves, ovens, electric hot water systems, ceiling fans, light fittings
• Electrical accessories, such as socket outlets, light switches, electrical cable, wall switches, plugs and cord extension sockets
• Electrical parts, such as electrical motors, switches, solenoids, elements

If you have not purchased electrical tools and equipment in this auction disregard this notice.

Electrical Power Tools and Equipment (Inc. electrical leads)

The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.

You are urged to:: 

• Use the power tool only for its intended purpose.
• If the power tool is for indoor use only, do not use outdoors.
• Do not immerse the power tool in water unless it is designed for this purpose.
• Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
• Do not use electrical power tools in the rain.
• Make sure you have dry hands when operating an electrical power tool.
• Do not use a damaged power tool.
• A power tool may not be intended for use by children or people with an illness or disability without supervision.
• Young children should not be allowed to play with the power tool.
• Some power tools require special precautions for installation or user maintenance or both.
• The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
• Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
• Ensure ventilation holes or outlets are not blocked or partially obstructed.
• If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
• If the supply cord or plug is damaged:
• The manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
• Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• Other power tools that have a supply cord that cannot be replaced, should be scrapped.
• The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
• A safety switch can enhance electrical safety when using electrical power tools.